ritetemp manual 8035C Features

Single Stage HEAT PUMP

NOTE: Wires marked with the dotted line are optional.

O or B

jumper wire

jumper wire

From		Furnace		G
and	AC unit
			O	Y
			or
			B

STEP 1 - Connect the G wire to the G terminal on the

thermostat.

This connects the Fan. STEP 2 - Add a jumper wire between W and Y.

HEAT PUMP

without auxiliary heat

Thermostat

A

STEP 3 - Connect the Y wire

C	R	to the Y terminal on the
			C	R	O or B Y
		thermostat.
				24VAC	Change
This connects the Compressor.						Comp
				Power	Over

STEP 4 - Connect the O or B wire to the O or B terminal on the thermostat. (If you have both O and B contact Ritetemp or your local HVAC

contractor for further help) This connects the change over valve. STEP 5 - Connect the R wire to the RC terminal on the Thermostat. This connects to the 24vac power.

Your HVAC system is now connected to the thermostat.

G

FAN

Return To Page 9

PG 15

8035C Features

The 8035C can be used with most 24 volt gas, oil or electric heating and air conditioning systems, single-stage heat pumps or gas millivolt heating systems. It cannot be used with 120 volt heating systems or multistage heat pumps. Ask The Home Depot for other thermostats to control those systems.

MENU

PROG

RESET

The 8035C is programmable. There are four programming periods per day. Each period can be programmed separately.

You can use the built-in time/temperature programs, or alter them to suit your schedule.

The 8035C separately programs each weekday, Saturday, and Sunday - for both heating and cooling.

You can easily override the programmed temperatures for as little as one programming period or for an entire vacation.

The large liquid crystal touch screen display shows time, day of the week, room and set temperatures. It will also remind

you when the filter should be changed in your blower.

Temperature swing adjustment lets you fine-tune your system for maximum comfort and energy efficiency.

A 4-minute minimum off time in COOL protects your air conditioning system from being damaged.

PG 16 Two "AA" batteries (included) are used to retain your time and temperature programs, and to