HOW TO ASSEMBLE YOUR ELECTRIC SKILLET
Remove all parts from the packaging.
ASSEMBLING SIDE HANDLES/LEGS
1.Place pan upside down on table.
2.Align handle screw holes over the screw posts on pan (2 places per handle).
3.Insert screws (2 per handle) through holes in bottom of side handles/legs and align screws in holes in the pan.
4.Tighten screws with a screwdriver until snug. Screws should be seated flush against handle.
5.Repeat steps 3 through 5 with the
RIVALSkillet
Electric
6.Once both handles are tightened securely, place skillet upright onto its legs. Assembly is complete.
7.Check the handles/legs periodically for looseness. If needed,
CAUTION: Do not operate skillet prior to assembly of SIDE HANDLES/LEGS and
LID HANDLE.
HOW TO USE YOUR ELECTRIC SKILLET
BEFORE FIRST USE
•Wash the BASE and LID in warm soapy water. Rinse and dry thoroughly. CAUTION: Do not wash or immerse TEMPERATURE CONTROL PROBE.
•Before using the skillet for the first time, condition the