Location
You can place the RBB650T anywhere you have the space: rear seat, trunk, or behind the rear seat in trucks and pickups. DO NOT place the unit in a high unsecured location such as a rear seat window deck. Sudden stops can cause the unit to fly forward. The RBB650T may also be used outside in DRY WEATHER ONLY. However, cables must be securely placed out of traffic areas to eliminate the possibility of tripping.
THE RBB650T MUST BE SECURELY MOUNTED, driving styles and road conditions such as sudden stops, sharp curves and bumpy roads may cause unsecured items to move about the vehicle causing vehicle damage and/or physical injuries to vehicle occupants.
Wiring
If you are installing the RBB650T subwoofer to replace your existing sub woofer, disconnect the speaker wires and remove the existing subwoofer from your vehicle. Place the RBB650T subwoofer in the location you selected in your vehicle and connect the existing speaker wires. Make sure to have the polarity of the speakers and wires correct (positive wire to positive speaker terminal and negative or ground wire to negative terminal)
If you are installing the RBB650T subwoofer to be used in addition to the left & right channels, you will need a amplifier to power the RBB650T sub woofer.
Consult amplifier installation manual for recommended connection method.
RCA Line Out
Stereo Receiver
LeftRight
Existing Speakers
To Strip Insulation from Wire:
Width of insulation stripped from end of speaker cable.
Twist strands of wire together
Amplifier
To Attach Wire to Speaker:
Hold open the terminals on the back of the RBB650T, insert rear speak wire. Color of your wires may be different than shown here.
Your stereo and/or amplifier may differ from those shown. Please refer to your owner's manual during installation.
