CAUTION:
Be sure that the Set using PING box is turned on if a setting by PING or ARP command is permitted.
6.Click the OK button.
7.Click the OK button again to be sure.
8.Enter the password set in the print server; then click OK. If the password is not set, just click OK without entering a password.
Note:
For information on the password function, see “password” on page
CAUTION:
After clicking OK, you must not turn off the printer while the new settings are being sent to the
9.The update is complete when the message “Configuration has been successfully completed” appears; then click OK.
| Rev. B |
