TP-Link TL-PA6030 manual Introduction, System Requirement, Important Safety Instructions

TL-PA6030AV600 3-port Powerline Adapter

Chapter 1 Introduction

This device is an AV600 3-port Powerline Adapter which transforms your house’s existing electrical wiring into a ubiquitous networking infrastructure. Simply plug this AV600 3-port Powerline Adapter into an ordinary AC power outlet which will easily extend your Cable/xDSL broadband connection or existing Ethernet (LAN) network to any other electrical outlet in any room of a house without the need of any new cabling.

This powerline adapter supports up to 600Mbps data rate over the existing household power circuit. With data rates of 600Mbps, full multimedia application can easily be supported throughout the whole house in addition to Internet access. This powerline adapter uses the existing power lines installed in a home as a path to transmit digital data, voice, audio and video between devices.

To ensure data communication’s security and multimedia applications, this powerline adapter support built-in 128-bit AES encryption.

The new powerline adapter TL-PA6030 from TP-LINK provides extra convenience and better

performance for your home network and mains filer.

. What’s more, the data transmission in the network can be significantly improved by the integrated mains filter.With minimum setup, you can install and use this powerline adapter within minutes. The adapter adds two useful functions:

1.Existing connection with a new unassociated device added via the Pair Button.

2.Reset to default setting via the Management Utility.

1.1 System Requirement

a)At least two AC power outlets (100–240V~, 50/60Hz) with standard home power wiring

b)A computer with the following:

¾Operating System with TCP/IP installed

¾Pentium III compatible processor and above

¾Ethernet LAN card installed with TCP/IP protocol

¾64 MB RAM or more

¾50 MB of free disk space (Minimum)

¾CD-ROM Drive

1.2 Important Safety Instructions

1.Do not open this product or attempt to service it; it may expose you to dangerous high voltage or other risks.

2.Do not operate this product near water.

3.Do not place or operate this product near a radiator or a heat register.

4.Do not expose this product to dampness, dust or corrosive liquids.

5.Do not connect this product or disconnect it from a wall socket during a lightning or a thunderstorm

6.Do not block the ventilation slots of this product, for insufficient airflow may harm it.

7.Do not put anything on this product.

2