TP-Link TL-PA6030 manual Physical Interface, Power Plug Ethernet Port Pair Button, Description

		TL-PA6030	AV600 3-port Powerline Adapter
	On	The adapter is connected to a powerline network.
Powerline LED	Blinking	The adapter is transferring data.
	Off	The adapter isn’t connected to any powerline network.
	On	At least one Ethernet port is connected, but there is no
		data being transferred.
Ethernet LED	Blinking	At least one Ethernet port is transferring data.
	Off	No Ethernet port is connected.

1.4 Physical Interface

There are three types of physical interfaces on this powerline adapter.

Power Plug

Ethernet Port

Pair Button

Interface	Description
Ethernet Port	Three 10/100/1000 Mbps Ethernet ports for connecting the adapter
	to PCs or broadband devices with network cables.
Power Plug*	A power plug for connecting the adapter to an AC power socket
	(100–240V~, 50/60Hz).
	Pair button is used to secure a powerline network. To secure your
	network, please follow the steps below. Firstly, plug in a new
	adapter, and press its pair button for one second; then plug in
Pair Button	another adapter and press its pair button for one second as well.
	The two buttons should be pressed within 2 minutes of each other.
	After that, wait about 60 seconds so that the two adapters can finish
	connecting.

*The provided power plug may differ from the picture due to different regional power specifications. Here we take the EU version as an example.

4