3. Confirm the printer is shown in the list view.

The your printer is shown in here.

Note:

If the printer isn’t shown in the list view, check following item. See Appendix A for details of the utility function.

Turn the printer on.

Without connecting a serial cable to the TM-P60 with Peeler, confirm that the “Search Method,“ and “Search Option IP“ are correct. You have to set it to correspond to the printer.

“Search Path“; Menu:Tool -> “Search Method.“ (You should check “Search Path selection: select All“)

“Search Option IP“; Menu:Tool -> “Search Option“ -> “IP“ (You should set the IP address and subnet mask to search.

See “Search Options - IP” on page A- 17 for details)

Search Method

Search Option IP

When you use serial cable, confirm connect a serial cable to the TM-P60 with Peeler and host PC, and turn the printer on again.

With connecting a serial cable to the TM-P60 with Peeler and host PC, confirm that the “Search Method,“ and “Search Option COM“ are correct. You have to set it to correspond to the printer.

2-18 Setup

Rev. B

Page 44
Image 44
Epson TM-P60 manual Search Method Search Option I P