
TM-P60 with Peeler Technical Reference Guide
LED
POWER
POWER LED | Meaning |
|
|
On | Power is on. |
|
|
Off | Power is off. |
|
|
Flashing | The printer is in |
|
|
ERROR
Printer Condition | ERROR LED | Meaning |
|
|
|
Power On | On | Printer is offline (paper out, |
|
| cover open, |
|
| charge is not enough for printer operation when the battery is |
|
| used to supply the power.) |
|
|
|
| Off | Printer is online. |
|
|
|
| Flashing | It indicates an error. See “LED Blinking Pattern” on page 1 for |
|
| troubleshooting |
|
|
|
Power Off, battery installed, and | On | Indicates that an abnormality occurred during battery |
AC adapter connected |
| charging. The battery must be replaced with a new one. |
|
|
|
| Off | No problem. |
|
|
|
BATT.
Printer Condition | BATT. LED | Meaning |
|
|
|
Power On without AC adapter | On | Remaining battery charge is not enough. It must be charged. |
|
|
|
| Off | Remaining battery charge is adequate. |
|
|
|
| Flashing | Remaining battery charge is below half. |
|
|
|
Power Off and battery installed | On | The battery is being charged. |
|
|
|
| Off | The battery is fully charged. |
|
|
|
Control Panel Buttons
The control panel has a FEED button that you may have to use, although most paper handling functions will be handled by your software.
POWER
Press the button to turn the power on or off. To turn off the power, you need to hold the button for more than 2 seconds.
FEED
Use this button to feed roll paper or to start a roll paper self test, or start printing status sheet. See “Self test mode” on page 2- 3.
Note:
The FEED button can be disabled by using an ESC/POS command. Refer to “ESC/POS Application Programming Guide” for details.
Rev. B |