
Note:
The allowable relation between the reflecting rate in the black mark portion (1) and the non black mark portion (2) must be as shown in the table below:
| Allowable combination of the reflecting rate [Units: %] | |||||
|
|
|
|
|
|
|
Black mark portion (1) | 17 | 16 | 15 | 14 | 13 | or less |
|
|
|
|
|
|
|
Non black mark portion (2) | 90 | 85 | 80 | 75 | 70 | or more |
|
|
|
|
|
|
|
The reflecting rate means the value which is measured with a Macbeth density meter (PCMII) D filter.
F.1.1 Printable Area
F.1.1.1 Label paper
❏Printable area for label paper
Example: Liner width: 57.5 mm/Label width: 54 mm
| 57.5 ± 0.5 |
|
1.75±0.75 | 54 ± 0.5 | 1.75±0.75 |
|
| 1.5 |
Programmable by control command
17dot | 404dot |
| Printable Area | |
|
|
| ||
4.75 | 48.5 | 4.25 | 1.5 | [Units: mm] |
| Printable Area |
| ||
|
|
|
|
| Rev. B |