
TM-P60 with Peeler Technical Reference Guide
Example: Liner width: 59.5 mm/Label width: 56 mm
1.75±0.75
4.75
59.5 ± 0.5 | 1.75±0.75 |
|
56 ± 0.5 | 1.5 | |
|
| Programmable by |
|
| control command |
17dot | 416ot | Printable Area |
|
| |
50 | 4.75 | 1.5 |
Printable Area |
| |
| [Units: mm] | |
|
|
Note:
The printable area may be out of alignment by 2.8 mm {0.11"} maximum (left or right), due to the paper position or tolerance of parts. To make the margin for both sides safely, it is recommended to set a margin of 2.8 mm {0.11"} or more. (Numeric values used here are average values for designing.)
❏Paper Width and Printable Area (Recommended)
Liner width (mm) | 59.5 | 57.5 | 54.5 | 48 | 41.5 | 35.5 | 29 |
|
|
|
|
|
|
|
|
Label width (mm) | 56 | 54 | 51 | 44.5 | 38 | 32 | 25.5 |
|
|
|
|
|
|
|
|
Printable Area (mm) | 50 | 48.5 | 45 | 38 | 32 | 26 | 20 |
|
|
|
|
|
|
|
|
Left margin (mm) | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
|
|
|
|
|
|
|
|
Right margin (mm) | 3 | 3 | 3 | 3.5 | 3 | 3 | 2.5 |
|
|
|
|
|
|
|
|
Positioning dot number | 17~416 | 17~404 | 17~376 | 17~320 | 17~272 | 17~272 | 17~176 |
|
|
|
|
|
|
|
|
(It is assumed that the label is placed on the center of the liner exactly. Numeric values used here are average values for designing.)
Rev. B | Consumable Specifications |