Beeper Function
This printer has a “beeper“ function. This function causes beeping in specified situations. The situations are the following:
❏The battery remaining is low (Memory switch can enable/disable this function)
❏The printer can’t find any Access point (wireless LAN). (Memory switch can enable/disable this function)
❏Roll paper is out (Memory switch can enable/disable this function)
❏A error has occurred except “printer temperature error.“ (Memory switch can enable/ disable this function)
❏Start of status sheet printing
❏The radio field intensity check is started
❏The radio field intensity check is processing
Note:
About memory switch, see “Memory Switches” on page 2- 11.
About status sheet, see “Confirming the current LAN setting of the printer” on page 2- 15. About radio field intensity check processing, see “Radio Field Intensity Check Mode” on page 2- 5.
Rev. B |
