Roadmaster VRVD630 Basic Operations, Changing the Battery, Initial System Start-Up, Warning LED

Basic Operations

Changing the Battery

The remote control uses a lithium button type battery, model CR 2025 3V. Do not use any other kind of battery in the remote. Follow these instructions when installing or replace the battery.

Turn the remote over, then slide the battery holder out of the remote.

Insert battery into battery holder with positive side of the battery facing up.

Insert battery holder into the re- mote control until you hear a click.

Dispose of All Batteries Properly

Basic Operations

Initial System Start-Up

Be sure to press the RESET button when using the unit for the first time, after all con- nections are completed correctly.

1.Turn off the unit power.

2.Press the RESET button. The RESET button on the housing must be activated with either a ballpoint pen or similar point- ed object. The RESET button is to be acti- vated for the following reasons:

• Initial installation of the unit after all wiring is completed.

• Some the function buttons do not oper- ate.

• Error symbol appears on the display.

Turning Power ON and OFF

Turn on the unit by pressing button or in- serting a disc in the DISC SLOT.

When system is on, press and hold the to turn off the unit.

Warning LED

The LED will fl ash if the front cover is not properly inserted into the main unit.

ESP Function

The unit features an anti-shock feature, which buffers a certain amount of the re- corded program into memory so that if the unit skips due to rough road conditions, the music or video will be uninterrupted.

The time of the buffered content varies de-

pending on the disc type:
CD, VCD	18 seconds
MP3	160 seconds
DVD	6 seconds
MPEG4	20 seconds

Mute Function

To turn off the sound instantly, press the MUTE button. To return it to the prior sound level, press MUTE again.

Mode Function

Press MODE repeatedly to switch between DVD, AV and TUNER modes.

Adjusting the Volume Level

Rotate the Volume knob to adjust the volume level.

Last Position Memory

•During disc playback, press and hold the Power button to turn off the unit, when you next turn on the unit, the DVD unit will resume playing from the point that it was interrupted.

•During disc playback, if you press MODE to switch to a different mode, when you next return to DVD mode, playback will re- sume from the point at which it was inter- rupted. Radio mode is the default mode when the unit is started without any discs or memory.

14