Installation
DIN FRONT-MOUNT (Method A)
IMPORTANT!
BEFORE THE FINAL INSTALLATION OF THE HEAD UNIT, CONNECT THE WIRING TEMPORARILY, MAKING SURE THE UNIT AND THE SYSTEM WORK PROPERLY.
Insert fingers into the groove in the front of frame to remove it.
Insert the buttons supplied with the old unit into the grooves on both sides of the old unit. The unit can be installed or re- moved from the dashboard using these buttons. (Fig. 1)
Fig. 1
Remove the half sleeve
| Bend the tabs |
1. Dashboard | to secure the |
| Mounting Sleeve |
| in the dashboard. |
3. Screw
2. Mounting
Sleeve
Fig. 2
After inserting the Mounting Sleeve into the dashboard, select tabs on top, bottom, and sides, then bend them to secure the mounting sleeve in the dash board.(Fig. 2)
Follow the diagram in Fig. 3 for installing the rear mounting strap to the head unit. The rear mounting strap will help keep the head unit from moving around inside the dashboard.
1.Dashboard
2.Nut (5mm)
3.Spring washer
4.Screw (5 x 25mm)
5.Screw
6.Strap
7.Plain washer
Fig. 3
