Battery operation
1.Remove the Battery cover on the rear of your CD radio cassette by pushing the catches in the direction shown.
2.Insert eight LR14 (C size) batteries into the compartment. Take care to ensure all batteries are inserted with the correct polarity as shown inside the battery compartment. Replace the battery cover.
3. Reduced power, distortion, and a ‘stuttering’ sound are all signs that the batteries may need replacing.
11
We would recommend for economy that your CD9949 is used on the mains whenever possible with battery operation for occasional or
Mains operation
1.Place your CD radio cassette on a flat surface.
2.Plug the mains lead into the Socket located on the rear of your CD radio cassette. Ensure that the plug is pushed fully into the socket.
3.Plug the other end into a wall socket and switch on.
4.Do not allow this unit to be exposed to moisture (e.g. dripping or splashing). Do not leave your radio where excessive heat could cause damage such as in a parked car where the heat from the sun can build up even though the outside temperature may not seem too high.
Note: The unit remains connected to the mains even when it is switched off. The unit is only isolated from the mains if the mains plug is removed from the wall socket.
ON
3
