Operating the radio
1.Slide Function switch to the Radio position.
2.Slide Waveband switch to select the required wave band . For the FM waveband fully extend the Telescopic aerial angle and rotate, if necessary, to obtain best reception.
3.Press and hold down either the Tuning up or Tuning down buttons for more than 0.5 sec to commence scan tuning. An audible tone will be heard indicating that the radio is tuning. The tone will increase in pitch for tuning up and decrease in pitch for tuning down.
4.Your radio will scan the selected waveband, sound a beep tone and stop automatically when it finds a station of sufficient strength.
5.To recommence scan tuning, press and hold down either the Tuning up or Tuning down buttons for more than 0.5 sec.
6.When the waveband end is reached the radio will beep and continue tuning from the opposite waveband end.
7.Adjust the Volume and Tone controls to the desired settings.
8.To switch off your radio slide the Function switch to the Off/Tape position.
Note: On FM if a station being received is weak some hiss may be audible. To reduce the hiss slide the FM Stereo/Mono switch (on rear) to the mono position. The stereo indicator will be removed from the display.
If you need any further advice, please call our Technical Helpline on :-
Off
Radio Tape CD
1
TUNING
3
3
VOLUME
7
MinMax
FM MW LW
2
Tone
7
Min Max
020 8758 0338 | 4 |
