Operating your radio - manual tuning
1.Switch on your radio by pressing the On/Off button.
2.Select the required waveband by pressing the Band button. The waveband selected will appear in the display. On FM fully extend the pigtail aerial from the rear of your clock radio. On MW rotate your radio for best reception.
3.A single press on either the Tuning Up or Down buttons will change the frequency up or down. The frequency steps are:- FM 50kHz and MW 9kHz.
4.Adjust the Volume control to the required level.
5.Press the On/Off button to switch off your radio.
If you need any further advice, please call our Technical Helpline on :-
1 2
3
3
4 | 5 |
020 8758 0338 | 12 |
|
