Setting alarm times |
| |
The alarms can be set to wake you by a buzzer, CD or the radio. Your |
| |
CD clock radio has 2 separate alarms which can be set to activate at |
| |
different times. |
| |
Setting alarm 1 | 1 | |
1. Slide the Alarm 1 function switch to the 'Adj' position. Alarm 1 time | ||
| ||
will flash in the display. |
| |
2. Press the down button to set minutes and the up button to set the | 2 | |
hour. Release the buttons when the correct time is reached. Alarm |
| |
1 time will continue to flash in the display. The clock uses a 12 hour |
| |
display with a PM indicator. Ensure that the correct 12 hour cycle |
| |
is selected. |
| |
3. Return the Alarm 1 function switch to the 'Off' position. The |
| |
display will revert to showing time. |
| |
Note: Incorrect display will result if both the Alarm function switches | 3 | |
are set to the 'Adj' position. |
|
2
Setting alarm 2
1.Slide the Alarm 2 function switch to the 'Adj' position. Alarm 2 time will flash in the display.
2.Press the down button to set minutes and the up button to set the hour. Release the buttons when the correct time is reached. Alarm 2 time will continue to flash in the display. The clock uses a 12 hour display with a PM indicator. Ensure that the correct 12 hour cycle is selected.
3.Return the Alarm 2 function switch to the 'Off' position. The display will revert to showing time.
If you need any further advice, please call our Technical Helpline on :-
2
1
2
3
020 8758 0338 | 12 |
|
