Playing a CD
1.Press the Play/Pause button to start playback. The display will show the track number. After a short time the display will revert to showing time.
2.Set the Volume control to the required setting.
3.To display the CD track number press the CD display button.
4.To pause playback press the Play/Pause button. The track number will flash in the display. To resume playback press the Play/ Pause button again.
5.To stop playback, press the CD Stop button.
6.To take out the CD, lift the CD door on the rear edge and remove CD from the spindle. The CD door should only be opened when the CD is in Stop mode.
If you need any further advice, please call our Technical Helpline on :-
1
3
2
4
5
020 8758 0338 | 8 |
|
