Switching on and setting the time
Before using your CD clock radio you must first set the correct time.
1. Place the unit on a flat surface. Plug the mains lead into a wall socket and switch on the wall socket.
2.The clock display will show 12:00. Ensure that the Alarm 1 and Alarm 2 function switches are set to the 'Off' position.
3. Press and hold down the Time Set button. The time will flash in the display.
4. Whilst holding down the Time Set button press the up button to set the hour and the down button to set the minutes. Release the buttons when the correct time is reached. The clock uses a 12 hour display with a PM indicator. Ensure that the correct 12 hour cycle is selected.
2 2
3
4
If you need any further advice, please call our Technical Helpline on :-
4
020 8758 0338 | 4 |
|
