Manual tuning - FM
1. | Press the Standby button to switch on your radio. | 1 |
2. | Press the Band button to select the FM band. Fully extend the |
|
| wire antenna for FM reception. |
|
3. | Press the Tuning Up/Down button to tune to a station. The frequency | 2 |
| will change in steps of 50 kHz on FM. |
|
4. | When the waveband end is reached the radio will recommence tuning |
|
| from the opposite waveband end. |
|
5. | 3 | 3 |
Set the Volume and Tone controls to the desired settings. |
|
6. To switch off your radio press the Standby button.
5 
5
6
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338
22
