Dynamic Range Control (DRC) settings - DAB
The DRC facility can make quieter sounds easier to hear when your radio is used in a noisy environment.
1.Press the Standby button to switch on your clock radio.
2.Press and hold in the Info button until display shows “Station order.”
3.Press the Tuning Up/Down button until the display shows "DRC value".
4.Press and release the Select button to enter adjustment mode.
5.Press the Tuning Up/Down button to select required DRC setting (default is 0) .
DRC 0 DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.
DRC 1 DRC is set as sent by broadcaster.
6.Press and release the Select button to confi rm the setting. The display will return to radio mode.
Note: Not all DAB broadcasts are able to use the DRC function. If the broadcast does not support DRC, then the DRC setting in the radio will
1
2
3,5 | 3,5 |
4,6
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338
18
