Setting the output terminals
Set the terminals from which the player’s video and audio signals are to be output.
1Select and set Options Output Terminal
Next Screen.
Use / to select, then press ENTER.
2Select and set the video and audio output terminals.
Select the actually connected video and audio output terminals.
Use /// to select, then press ENTER.
For details on the settings, refer to step 4 on page 23.
When COMPONENT VIDEO or VIDEO is selected for Video, no sound is output from the HDMI OUT terminal (a warning message is displayed).
Software updating
The software of the player can be updated by connecting it to the Internet using a LAN cable.
Before updating the software, make sure that you have connected the player to the network and made the necessary settings (pages 22 and 48).
Caution
•10 to 20 minutes are required to update the software. The picture turns off during this process, but do not unplug the power cord until the front panel display turns off.
•When the front panel display is off, turn it on with FL DIMMER. When updating the player’s software with the front panel display off, do not unplug the power cord until the FL OFF indicator turns off.
•Depending on the Internet connection conditions, downloading may take a long time.
•Do not unplug the power cord during software
updating. Doing so may result in an operation failure.
•There are two processes for software updating, downloading and updating. Both processes may take a certain period of time.
•Other operations are defeated during software
updating. Furthermore updating process cannot be canceled.
Note
•Steps 1 to 4 are the operations performed by the user (they are intended to download the software from the Internet).
•Steps 5 to 7 are the operations performed (automatically) by the player (they are intended to update the software).
1When playback is stopped, display the Home Menu screen.
Press 
HOME MENU.
Use / to select, then press ENTER.
3Select and set Options Software Update
Start.
Use / to select, then press ENTER.
•If the player is already running the latest software, the message “The player’s software is up to date and does not need updating.” is displayed.
4Select and set Yes.
Use / to select Yes, then press ENTER.
•The help menu is displayed if the player cannot connect to the Internet. Check the connections and settings (pages 22 and 48).
5 Downloading of the software start.
The software download status is displayed on the screen.
•Depending on the Internet connection conditions, software downloading may take a certain period of time.
6 Updating starts.
“DOWNLOAD” and a number are displayed on the front panel display, after which the display switches alternately between this and “DATA CHECK”, “WRT IPL”, “WRT SD”, “WRT KRNL”, “WRT SYS1”, “WRT SYS2”, “WRT DRV” and “WRT FLC”.
• Software updating may take a certain period of time.
7 Updating completes.
The front panel display shows “DOWNLOAD OK” and the player turns off automatically.
Restoring all the settings to the factory default settings
1Check that the player’s power is turned on.
2Check that there is no disc in the player.
If there is a disc in the player, remove it.
3 While pressing , press STANDBY/ON.
Operate using the buttons on the player’s front panel.
Note
•After restoring all the settings to the factory default settings, use Setup Navigator to reset the player (page 23).
•When all the settings are restored to the factory defaults, all the data for the secondary video (Picture-
•If a disc is loaded, the settings cannot be restored to the factory defaults by performing the above operation.
07
51
2 Select and set Initial Setup. | En |
