Pioneer BDP-V6000 operating instructions Making settings using the Setup Navigator menu

Chapter 4

Getting Started

Making settings using the Setup Navigator menu

Be sure to perform these settings when using the player for the first time.

Caution

•Before turning on the power, check that the connections between the player and other devices are correct. Also, turn on the power of the devices connected to the player before turning on the player’s power.

•The screen in step 11 and test tones are output simultaneously according to the settings in steps 4 to 7. Lower the volume of the devices connected with the player.

Note

•By factory default, the KURO LINK function is not activated. To activate the KURO LINK function using Setup Navigator, KURO LINK is set to On on the player (page 44), and if a Pioneer KURO LINK- compatible Flat Panel TV is connected, turn on the TV's KURO LINK function.

•When a Pioneer Flat Panel TV or front projector compatible with the KURO LINK function is connected to the player using an HDMI cable, the player is automatically set to the optimum picture quality for the connected device.

TOP MENU	TOOLS
	ENTER
HOME	RETURN
MENU

1Turn on the TV’s power and switch the input. See the TV’s operating instructions for instructions on operating the TV.

2Turn on the player’s power.

Press  STANDBY/ON.

Check that the Setup Navigator menu is displayed.

If the Setup Navigator menu is not displayed

Press HOME MENU to display the Home Menu, select Initial Setup  Setup Navigator 

Start, then press ENTER.

04

3 Select the OSD language.

Use / to select, then press ENTER.

Setup Navigator

BD PLAYER

Please select the on-screen display language.

Audio, subtitle and BDMV/DVD-Video menu

language will also be set.

When a Pioneer Flat Panel TV that is compatible with KURO LINK is connected to this player’s HDMI OUT terminal, language settings are imported from the Pioneer Flat Panel TV’s language settings before Setup Navigator begins.

4Select and set the video and audio output terminals.

Select the actually connected video and audio output terminals.

Use /// to select, then press ENTER.

Setting item		Output terminal name
Video	HDMI	HDMI OUT
	COMPONENT VIDEO	VIDEO OUT COMPONENT VIDEO
	VIDEO		VIDEO
Audio	HDMI	HDMI OUT
	DIGITAL AUDIO	DIGITAL OUT
	ANALOG AUDIO	AUDIO OUT

Caution

•When HDMI is selected for Video, no video signals are output from the COMPONENT VIDEO or VIDEO output terminals.

•When COMPONENT VIDEO or VIDEO is selected at Video, no video signals are output from the HDMI OUT terminal.

•The video and audio signals output from the set output terminals are output synchronously (lip synchronization).

•When COMPONENT VIDEO or VIDEO is selected at Video, no sound is output if HDMI is selected at Audio.

Follow the procedure below to redo the connections, then select the proper connection at the setup screen.

23

En