Operating your radio - FM
1. | Carefully extend the telescopic aerial. |
|
2. | Press the On/Off button to switch on your radio. The display will show | 2 |
| "Roberts" for a few seconds. |
|
3.Press the Band button to select the FM band.
4.Press and release the Select button until the display shows
"Auto tune <>". | 3 |
5.Press the Tuning Up button to cause your radio to scan in an upwards direction (low frequency to high frequency) and stop automatically when it fi nds a station of suffi cient strength.
6. After a few seconds the display will update and show station name. | 4 |
|
7.Press the Tuning Down button to scan the FM band in a downwards direction (high frequency to low frequency).
8.When the waveband end is reached your radio will recommence tuning
from the opposite waveband end. | 7 | 5 |
9.Adjust the Volume and Tone controls to the required setting.
10.To switch off your radio press the On/Off button.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 | 14 |
