Roberts Radio Ecologic 3 manual Scan sensitivity setting FM, 4,5

Scan sensitivity setting - FM

Your radio will normally scan for FM broadcasts which are strong enough
to give good reception. However, you may wish the Auto-scan function
to also be able to fi nd weaker signals, possibly from more distant radio	1
transmitters. Your radio includes a local / distant option for the Auto-scan

function.

1. Press the On/Off button to switch on your radio.

2.	If needed, press the Band button to select the FM band.	2
3.	Press and hold the Info button until the display shows "Mono override"
	on the lower line.
4.	Press and release the Tuning Up or Down buttons until the display	3
	shows "FM Scan Zone" then press the Select button to enter the
	scan zone selection menu.

5. Press the Tuning Up or Down buttons to switch between Local and Distant options on the lower line of the display. The Distant option will allow the radio to fi nd weaker signals when scanning.

4,5 4,5

6.Press the Select button to confi rm your selection. The radio will then revert to the normal information display. The Local or Distant setting is stored in the radio and remains in force until changed or until a System

Reset.

4,6

Note: The initial setting (out of the box, or after a System Reset) causes the radio to ignore weak (distant) signals.

19