Roberts Radio Ecologic 3 manual Finding new stations DAB, Signal strength display DAB

Finding new stations - DAB

As time passes new stations may become available. To fi nd new stations proceed as follows:-

1.Press and release the Auto Tune button, the display will show "Fast scanning". Your radio will perform a scan of the UK DAB frequencies. As new stations are found the station counter on the right-hand side of the display will increase and stations will be added to the list.

2.To carry out a full scan of the entire DAB Band III frequencies press and hold down the Auto Tune button for more than 2 seconds and then release. The display will show "Full scanning". As new stations are found the station counter on the right-hand side of the display will increase and stations will be added to the list.

1

2

Signal strength display - DAB

1. Repeatedly press and release the Info button until the display shows the signal strength.

1,3

2. Position your radio and carefully angle the telescopic aerial for best reception using the signal strength display as a guide. Move your radio around and position it so as to give maximum number of black rectangles on the signal strength display. The clear unfi lled rectangle indicates the minimum signal level required for satisfactory reception.

3. Press the Info button to exit the signal strength display.

9