Honeywell VRX180 Logic Inputs, Digital Outputs AC Outputs DC Outputs, Relay Alarm Outputs

Introduction

Table 1-1 Specifications (continued)

Input Impedance	51K	5.6K
Input Current	0.9 mA @ 100 Vac	1.1 mA @ 12 Vdc
		3.2 mA @ 24 Vdc
Minimum ON Current	0.3 mA	0.3 mA
Maximum OFF Current	0.15 mA	0.2 mA
Base Power Required*	50 mA maximum	50 mA maximum
OFF to ON Response	5 to 30 ms	1 to 8 ms
ON to OFF Response	10 to 50 ms	1 to 8 ms
	Logic Inputs
Number	6 (dry contact) per module, up to 6 modules per video recorder
Isolation from ground	2300 Vac/1 min.
Switching Voltage	5 Vdc
Switching Current	5 mA
	Digital Outputs
	AC Outputs		DC Outputs
Number	6 per module, up to 6 modules per video		6 (current sinking) per module, up to 6
	recorder. Only 1-5 on each module can		modules per video recorder. Only 1-5
	be configured as DAT outputs.		on each module can be configured as
			DAT outputs.
Operating Voltage	15 to 264 Vac		10.2 to 26.4 Vdc
Output Type	SSR (Triac)		NPN open collector
Peak Voltage	264 Vac		40 Vdc
AC Frequency	47 to 63 Hz		N/A
Isolation from ground	2300 Vac/1 min.		1100 Vac/1 min.
Isolation between outputs	350 Vac		30 Vac
ON Voltage Drop	<1.5 Vac (>0.1A)		1.5 Vdc maximum
	<3.0 Vac (<0.1A)
Maximum Load Current	0.5A per point		0.3A per point
Maximum Leakage Current	4 mA (264 Vac, 60 Hz)		0.1 mA @ 40 Vdc
	1.2 mA (100 Vac, 60 Hz)
	0.9 mA (100 Vac, 50 Hz)
Maximum Inrush Current	10A for 10 ms		1A for 10 ms
Minimum Load	10 mA		0.5 mA
Base Power required*	20 mA/ ON pt. 250 mA		120 mA maximum
	maximum		5V
OFF to ON Response	1 ms		1 ms
ON to OFF Response	1 ms +1/2 cycle		1 ms
Fuses (European type 5 x	1 per output, 1.0A slow blow		1 per output
20mm)			1A fast blow
	Relay (Alarm) Outputs
Number	6 per module, up to 6 modules per video recorder. Only 1-5 on each module can be
	configured as DAT outputs.
Contact Rating	2A, 250 Vac on resistive load
Isolation from ground	2300 Vac/1 min.
Isolation between outputs	2300 Vac/1 min.
Contact Type	SPST normally open (NO), individually configurable to normally closed (NC) via
	jumper

* Base Power Required is the power required to provided module operation within specifications.

Video Recorder - User Manual 5