Honeywell VRX180 Message/Symbol Color Description, Color Description shown low to high priority

Online Operations Using Primary Displays

Description of Messages and Symbols

Table 6-6 Messages and Symbols at Bottom of Display

	Message/Symbol		Color			Description
			Red		An active alarm exists. Flashes while unacknowledged. When the
	A	followed by text
					operator acknowledges the alarm, the flashing will stop. The symbol
description of alarm					and text will remain until the alarm has cleared.
			Blue		A diagnostic error has been detected. Flashes while
	D	followed by text
					unacknowledged. The symbol and text will remain until the operator
description of diagnostic					acknowledges or deletes the diagnostic in the online Access
					Summaries menu.
Data Storage Messages			Color			Description (shown low to high priority)
	UPDATING DISK		Yellow		Instrument is flushing all buffered data to the disk.
	CHECKING DISK		Yellow		Whenever the front panel has been opened and closed, the
					instrument checks that a properly formatted disk is installed and
					ready to receive data.
	INITIALIZING		Yellow		Initialization is in progress.
	DS INIT FAILED		Yellow		Initialization failed. Possible reasons: disk has not been formatted, is
					write-protected, or is defective.
	STORAGE FULL		Yellow		Less than 5 minutes of space remains in the internal buffer. Data is
					accumulating in the internal buffer (temporary storage) because it is
					unable to store the data on the floppy disk. Possible reasons include:
					•	Disk is full and storage is programmed as non-rollover.
					•	There is no disk in the drive.
					•	The disk is write-protected.
					•	The operator is in the process of retrieving stored data from the
						disk.
					•	The disk is “not current” (see DSK NOT CURRENT below).
					•	The front bezel is open.
					The message will disappear when the condition is corrected, or if data
					storage is disabled (turned off).
	DISK FULL		Yellow		No more space is available on one or more of the files on the floppy
					disk for storage of data as programmed. This message will appear
					only if at least one partition on the disk is programmed for non-
					rollover operation. The message will disappear when a new disk is
					initialized, or if data storage is disabled (turned off).
	DISK WARNING		Yellow		Floppy disk is not full but available space on one or more disk files
					has reached the programmed warning limit. The message will
					disappear when a new disk is initialized, or if data storage is disabled
					(turned off).
	BEZEL OPEN		Yellow		Instrument front panel is open or is not closed securely.
	DISK ERROR		Yellow		The instrument is attempting to store data but the disk is either not
					properly formatted or is faulty. The message disappears when the
					disk is formatted or replaced, or if data storage is disabled (turned
					off).
	DSK NOT CURRENT		Yellow		When a disk is initialized the instrument marks it as the “current” disk.
					The instrument will only store data to the “current” disk. If any other
					disk is placed in the drive this message will appear. The message will
					disappear when the “current” disk is inserted or a new disk is
					initialized.
	WRITE-		Yellow	The disk in the drive has its write-protected tab set to the protect
	PROTECTED				position.
	DISK MISSING		Yellow		Data storage is enabled, but no disk is installed in the disk drive.

218 Video Recorder – User Manual