Honeywell VRX180 user manual Set Up New Schedules, Trend Data

Programming Function Blocks and Features

Set Up New Schedules

This item contains setup menus for all data sets. Select it to specify what data to store and how to store it. If a type of data storage is not scheduled, no disk file will be created for it.

ATTENTION

If you make any changes to any item under SET UP NEW SCHEDULES, you must initialize using new schedules to activate those changes.

The following items appear under SET UP NEW SCHEDULES and are described under the following headings.

•Trend Data 1

•Trend Data 2

•Trend Data 3

•Trend Data 4

•Alarms

•Events

•Diagnostics

•Unit Data

•Disk capacity

•Batch Control

Trend Data 1

At the top of the display the message “SETUP IS CURRENT” indicates that current setup for storage of TREND 1 is exactly as shown. If the message is “SETUP IS NOT CURRENT”, then the TREND 1 setup has been changed since a disk was last initialized. To make a NOT CURRENT setup CURRENT, you must initialize the disk using new schedules.

Set up Trend Data 1 as described in Table 4-72.

Video Recorder – User Manual 167