Honeywell VRX180 user manual Assign Displays to Keys, Assign Displays To Keys Prompts

Programming Function Blocks and Features

Assign Displays to Keys

Your instrument has 4 display keys. You can assign a total of 10 displays to these keys. Pressing the Display 1 key ( 1 ) accesses the format you assign to Display 1. Display 2 key ( 2 ) accesses Display

2 and Display 3 key ( 3 ) accesses Display 3. The Display key () accesses displays 4-10. Table 4-64 describes the prompts for assigning displays to keys.

Table 4-64 Assign Displays To Keys Prompts

Prompt		Range/Selections	Definition
BLANKING TIME		OFF, 1 HOUR, 30 MIN, 15	This is a screen-saver type function. If enabled, the screen
		MIN, 5 MIN, 1MIN	will blank after time selected. Screen will unblank if a key is
			pressed or an alarm/diagnostic occurs.
DISPLAY KEY		0, 1, OFF, PARM	By selecting PARM, you can connect a discrete input
			parameter which will function as the Display key. Each off-
			to-on transition of this discrete will behave as if the Display
			key were pressed.
			Select 0, 1, or OFF to disable this function.
BACKGROUND		WHITE, BLACK	This sets the background color of displays to black or white.
COLOR			Affects all Trend (live and replay), Bar Graph, and Panel
			displays. Does not affect Loop, Unit Data, Summary, or
			menus.
SELECT PEN		PEN #1	Assign a color to each of up to 12 points. Affects points
COLOR		PEN #2	displayed on all Trend (live and replay), Bar Graph, Loop,
	.		and Panel displays. Pen #1 corresponds to Point #1, Pen #2
	.		corresponds to Point #2, etc.
	.		Choices: Green, Cyan, Yellow, Purple, Blue, Brown, Red,
		PEN #12
			Black, White.
			Attention: A Yellow pen appears yellow on a black
			background and orange on a white background.
			Caution: Do not select a white pen color for a white
			background or a black pen color on a black background;
			these will render your points invisible.

(continued)

Video Recorder – User Manual 157