Honeywell VRX180 user manual Load Program Program Number, From Memory

Setpoint Profiler

Table 5-4 Setpoint Profiles Prompts (continued)

Prompt	Range/Selections	Definition
LOAD PROGRAM	Files with .LNS extension.	Select a program to load into the Setpoint
FROM DISK		Profiler function block. Press Enter to load.
		Existing profiles in the instrument will be
		replaced by the profiles in the program being
		loaded.
		Example
		You are loading Program1.LNS which
		contains Profiles #1, #2, and #3. These
		profiles will replace the profiles currently set
		up in the instrument. Profile #4 will not be
		replaced.
LOAD PROGRAM	PROGRAM NUMBER	Select a program 1-96 to load into the
FROM MEMORY		Setpoint Profiler function block.
		There are up to 96 “slots” allotted for program
		memory storage. Depending on how many
		profiles your instrument has, each program
		will contain a certain number of profiles.
		See How programs are stored in memory on
		page 198 for details.

		Floppy
Program	Profile	Disk
Memory	Function
	Block
	Not allowed

Figure 5-13 Allowable and Non-Allowable Program Storage

192 Video Recorder – User Manual