Honeywell VRX180 user manual Signal Clamp Prompts, OUT High Limit LOW Select, High Select

Programming Function Blocks and Features

Signal Clamp

If input is between Low Select and High Select, the output CVn OV equals the input. If the input exceeds these two limits, the output equals the preset value.

Table 4-44 describes the Signal Clamp prompts. See Table 4-2 for additional prompts.

Table 4-44 Signal Clamp Prompts

Prompt	Range/Selections	Definition
OUT LOW LIMIT	OFF or number	Displayed output value will be clamped and will flash
		when these limits are exceeded.
OUT HIGH LIMIT
LOW SELECT	OFF, analog parameter,	If input goes below this number, the output will equal the
	number	preset value. Otherwise, the output equals the input.
HIGH SELECT	OFF, analog parameter,	If input goes above this number, the output will equal the
	number.	preset value. Otherwise, the output equals the input.
INPUT	OFF, analog parameter,	Input to be clamped.
	number
PRESET	OFF, analog parameter,	Output will go to this value when the input exceeds the
	number.	low or high select values.

Video Recorder – User Manual 137