Honeywell VRX180 user manual Setpoint Profiles Menu in Online mode, Setpoint Profiles Prompts

Setpoint Profiler

Setpoint Profiles Menu (in Online mode)

This menu lets you define profile ramp and soak segments and associated parameters, and store and load programs to and from floppy disk or memory. See Figure 5-13 for allowable and non-allowable storage.

To access the Setpoint Profiles menu:

1.Press the Menu button until a main menu is displayed.

2.Select Set Mode and change the mode to Online.

3.Select Setpoint Profiles.

4.Select a profile (#1 through #4) to program.

Table 5-4, Table 5-5, Table 5-6and describe the Setpoint Profile prompts.

Table 5-4 Setpoint Profiles Prompts

Prompt	Range/Selections	Definition
EDIT PROFILE #1		Select a profile to edit. See Table 5-5 for
EDIT PROFILE #2		prompts.
EDIT PROFILE #3
EDIT PROFILE #4
STORE PROGRAM TO	STARTING PROFILE #	Select 1-4.
DISK		Select the lowest numbered profile to be
		stored; that is, Profile 1, 2, 3, or 4. See How
		programs are stored on a disk on page 200
		for details.
	NUMBER OF PROFILES	Select 1-4.
		Number of profiles (1, 2, 3, or 4) determines
		how many profiles will be stored, starting with
		the Starting Profile #. For example, if Starting
		Profile # is 1 and Number of profiles is 3,
		then Profiles 1, 2, and 3 are stored. See How
		programs are stored on a disk on page 200
		for details.
	FILE	Select the filename and number. Filename
		extension is .LNS. After you select the
		number and press Enter, the profile(s) are
		stored to disk.
	FILES ON DISK	Lists all files on the disk.
STORE PROGRAM TO	PROGRAM NUMBER	Select 1-12.
MEMORY		There are up to 96 “slots” allotted for profile
		memory storage. Depending on how many
		profiles your instrument has, each program
		will contain a certain number of profiles. See
		How programs are stored to memory on page
		198 for details.
	STORE PROGRAM TO MEMORY	Select this to store program to memory.

Video Recorder – User Manual 191