Honeywell VRX180 Auto Cycle OFF, on, Auto Cycle Count, Edit Profile Loops, From Segment #

Setpoint Profiler

Table 5-5 Edit Profile Prompts (continued)

Prompt		Range/Selections	Definition
AUTO CYCLE		OFF, ON	Select ON to have the profile (or batch phase if
			defined) repeat AUTO CYCLE COUNT times.
			Automatically re-runs the profile when ON. The
			parameter AUTO CYCLE COUNT controls the
			number of additional cycles through the profile.
			When AUTO CYCLE is ON and AUTO CYCLE
			COUNT is zero (0), the profile will cycle forever.
			For a single phase profile, the profiler must
			progress to the END state before cycling back
			to segment 1. Once the profiler is ENDed, the
			automatic cycling function will change the
			profiler to the READY state for one machine
			cycle (clearing the profiler’s discrete outputs)
			before proceeding to the RUN state. The
			elapsed time of the profiler will continue due to
			re-cycling.
			For a multiphase profile, the profiler must
			progress to the END state following segment
			BATCH LAST SEGMENT before cycling back to
			the BATCH FIRST SEGMENT. Once the
			profiler is ENDed, the automatic cycling
			function will change the profiler to the RUN
			state. The elapsed time of the profiler will
			continue running during recycling.
AUTO CYCLE COUNT	0-254		0: the profile (or batch) will repeat forever.
			1-254: the profile (or batch) will repeat this
			many times.
EDIT PROFILE LOOPS		LOOP #1-4	Define up to 4 loops per profile. Note that the
		FROM SEGMENT # 1-63	repeat count is the number of loop repetitions,
			not the number of loop executions. See Loop
		TO SEGMENT # 1-63
			Segments on page 184 for details.
		REPEAT COUNT 1-999
JUMP FROM	0-63		The profile can be forced to jump from any
SEGMENT			segment to any other segment. A jump within a
			loop will continue that loop. A jump outside a
			loop will exhaust that loop. A jump outside the
			batch phase will exhaust any auto cycling in
			effect.
			At the completion of this segment, the profiler
			will jump to the beginning of JUMP TO
			SEGMENT.
JUMP TO SEGMENT	0-63		At the completion of JUMP FROM SEGMENT,
			the profiler will jump to the beginning of this
			segment.

194 Video Recorder – User Manual