Honeywell VRX180 user manual How to hold a profiler 14 Profiler Hold Procedure

				Setpoint Profiler
How to hold a profiler
			Table 5-14 Profiler Hold Procedure
		Step	Action	Result/Notes
	1		Perform steps 1 and 2 from Start procedure	Profile menu is displayed.
			(Table 5-13).
	2		Press Decrement button to move cursor to	The profiler is held at its present value and the
			Hold. Press Enter.	segment’s events are frozen. Elapsed time
				continues. Run time stops. Events are held at
				their current states.

ATTENTION

A profile can also be put on HOLD by pressing the F2 button, but only if that profile’s HOLD parameter was configured as SY1 F2. See Section 5.4.

How to reset a profiler

Table 5-15 Profiler Reset Procedure

Step	Action		Result/Notes
1	Place profiler in Hold.	See Profiler Hold procedure inTable 5-14.
1	Perform steps 1 and 2 from Start procedure		Profile menu is displayed.
	(Table 5-13).
2	Press Decrement button to move cursor to		Profiler is reset to segment #1. All profiler timers
	Reset. Press Enter.		are reset. All events go OFF. Profiler output
			goes to starting value of segment #1.

ATTENTION

A profile can also be RESET by pressing the F3 button, but only if that profile’s RESET/RUN parameter was configured as SY1 F3. See Section 5.4.

Video Recorder – User Manual 203