Honeywell VRX180 user manual Pretune Complete menu, Pretune Complete Prompts

Online Operation Using Menus

Table 7-12 Pretune IDENTIFYING & CALCULATING Prompts

(continued)

Prompt	Definition
SETPOINT	Current working set point value of the loop being tuned. This
	is a read-only prompt.
RUN TIME	Elapsed time since pretune was started. This is a read-only
	prompt.
ABORT	Select to cancel identifying and calculating and return to the
	stopped status.

Pretune COMPLETE menu

Table 7-13 describes the Pretune COMPLETE prompts.

	Table 7-13 Pretune COMPLETE Prompts
Prompt		Definition
STATUS		Status Completed. This is a read-only prompt.
PB/GAIN		New Prop. Band or gain determined by pretune. This is a
		read-only prompt.
RESET		New Reset determined by pretune. This is a read-only
		prompt.
RATE		New Rate determined by pretune. This is a read-only prompt.
INSTALL		Select to install the new pretune values into loop’s tuning
		parameters (specified by TUNE SET in Table 7-11.)
ABORT		Select to delete the new pretune values if you do not wish to
		install them.

240 Video Recorder – User Manual