Honeywell VRX180 user manual Program Capability

	Introduction
	Table 1-1 Specifications (continued)
	Program Capability
Number of	Memory can store 96 programs for a single channel programmer, 48 programs for a dual
Programs	channel programmer, 32 programs for a three channel programmer, and 24 for a four
	channel programmer. Programs can also be stored to floppy disk. Programmer has ability
	to start a program at a predetermined time.
Number of	63 segments per profile
Segments
Ramping Capability	Ramp X - Ramp rate is set by specifying x degrees per second, per minute, or per hour.
	Ramp T - Ramp rate is set by selecting the time to go from previous setpoint to next
	setpoint in t time.
	Ramp E - Ramp rate is set to increment by ∆ SP for every pulse of a digital input.
	Value Duration Ramp - Ramp rate is based on the start value of the ramp and the time
	specified to reach the next soak start value.
Ramp Time Range	0-9,999,999 hours, minutes, or seconds.
Soak	Guaranteed or non-guaranteed. Can be applied to ramp or soak segment or across entire
	profile/program.
Soak time range	0-9,999,999 hours, minutes, or seconds.
Program Cycling	Entire programs or portions of a program can be cycled up to 99 times. Loops can be
	nested up to 4 deep.
Startup/Shutdown	Can be set up to use a predefined startup profile separate from the normal processing
	programs. Shutdown profile can be attached to the end of a profile and can be jumped to
	for emergency shutdown.
PV Hot Start	Can start the profile at the point where the present PV value first intersects the profile.
Batch Programming	1 to 255 Batch numbers. Batch number is assigned by the programmer and is incremented
	automatically when batch is started.
	Using a keyboard or bar code reader and the front keyboard connector, a batch can be
	labeled with a name of up to 8 characters.
Profile Events	Up to 16 events can be defined in each segment of a profile. Each event’s state is
	activated at the beginning of the segment and is held throughout the segment.

Video Recorder - User Manual 3