Honeywell VRX180 user manual Set Clock Prompts

Programming Function Blocks and Features

4.22 Set Clock

To assure data, alarms, and events are properly time stamped, the clock must be properly set. The clock uses military time.

Select "CLOCK" from the main Program menu. Enter the date and time with the following prompts.

Table 4-68 describes the Set Clock prompts.

Table 4-68 Set Clock Prompts

Prompt		Range/Selections	Definition
MONTH		JAN - DEC	Enter the date and time.
DAY	1-31
YEAR		Enter year
HOURS	0-23
MINUTE	0-59
FORMAT		USA = MMDDYY	Select clock format.
		INTL = DDMMYY

IMPORTANT

Resetting the clock can affect the storage schedule of a unit in service.

If the clock is set back more than 5 minutes, the following actions will take place:

Data in storage buffers will be copied to the floppy disk and the buffers will then be cleared.

Data collection for storage will stop until the operator reinitializes the schedule.

If the clock is set back less than 5 minutes, collection of data storage and trends will stop until the setback time elapses and the clock "catches up" with the original collection schedule. A warning prompt will appear on the display before these actions occur. You can then cancel the clock change if desired.

162 Video Recorder – User Manual