Honeywell VRX180 user manual Program Analog Outputs, Analog output type, Analog Output Types

Programming Function Blocks and Features

4.9 Program Analog Outputs

The analog outputs will be accessible if an analog output board is detected upon power up.

If the instrument will be used for control, program the loops first. See Program Control Loops in Section 4.8.

Select an analog output to program.

Analog output type

Select the output type from Table 4-11.

Table 4-11 Analog Output Types

Type as displayed	Full name of output type
CAT	Current Adjusting Type (Current output)
DAT	Duration Adjusting Type (Time proportioning output)

Table 4-12 shows the prompts for each type of Analog Output.

Table 4-12 Prompts For Analog Output Types

	CAT	DAT
	IN DECIMAL POS	IN DECIMAL POS
	OUT DECIMAL POS	INPUT SOURCE
	INPUT SOURCE	INC SLEW LIMIT
	IN LOW LIMIT	DEC SLEW LIMIT
	IN HIGH LIMIT	IMPULSE TIME
	OUT LOW LIMIT	MIN ON TIME
	OUT HIGH LIMIT	MIN OFF TIME
	INC SLEW LIMIT	FAILSAFE
	DEC SLEW LIMIT	FAILSAFE VALUE
	FAILSAFE	OUTPUT RELAY
	FAILSAFE VALUE
Table 4-13 describes each prompt.

Video Recorder – User Manual 101