Honeywell VRX180 Select Filename Cycle Dryer, Start Minute, Start Month JAN-DEC, Start DAY

						Programming Function Blocks and Features
			Table 4-74 Unit Data Prompts (continued)
	Prompt		Range/Selections			Definition
SELECT FILENAME		FILE		CYCLE	DRYER	Select a file name to identify the type of Unit data to be
			PROD	RECORD	TANK	stored.
			UNIT	LOOP	REACTR
			CONFIG	KILN	VESSEL
			CALIB	WCHEM	PRESS
			FURNCE DEMIN		CONTRL
			BATCH	FERMTR	LEHR
			LINE	STRLZR	OVEN
			ZONE
START HOUR		0-23				If no external enable is specified, select a starting date
						and time and an interval for periodic storage. Set
						Interval Days to 31 if you want the timed schedule to
START MINUTE		0-59				repeat on the same day each month.
						This timer schedule will run in any Data Storage mode. In
						CONTINUOUS mode, it will start as scheduled and
START MONTH			JAN-DEC			collect samples until stopped by manual command (the
						ENABLE STORAGE in the Online Data Storage menu).
						In BATCH mode, the timer schedule will be started and
START DAY		1-31
						stopped by an Online menu selection (BATCH STATE)
						by the operator, or by an optional discrete input
						designated as the BATCH CONTROL.
START YEAR		1994-2038
INTERVAL DAYS		0-31
INTERVAL HOURS		0-24
INTERVAL MINS		0-59

Video Recorder – User Manual 171