Manual tuning - FM
1.Fully extend the Telescopic aerial and press the On/Off button to switch on your radio.
2.Press and release the DAB/FM/AUX button to select the FM band.
3.Rotate the Tuning/Select control or press the Tuning Up or Down buttons to tune to a station. The frequency will change in steps of 50kHz.
4.When the end of the waveband is reached the radio will recommence tuning from the opposite end of the waveband.
5.Set the Volume and Tone controls to the desired settings.
6.To switch off your radio press the On/Off button.
If you fi nd that an FM broadcast has a lot of background hiss, this may often be reduced by setting the radio into Mono reception mode for the current FM station. Please refer to the section "Stereo / Mono setting - FM" on page 17 for further details.
1,6
2
3
5 5
5
15
