Roberts Radio ecologic 7 manual Nap timer

Nap timer

The Nap timer facility allows you to set your radio to wake you after a predetermined interval (up to 2 hours) without needing to set the alarm. The nap timer can be set when your radio is switched on or in stand-by mode. The nap timer should only be used when the radio is powered from the mains. The radio's clock does not operate when the radio is in standby and powered solely from its batteries.

1.Press the On/Off button to switch on the radio if required.

2.Press the Menu button once or twice as needed until "Main Menu" appears on the display. Rotate the Tuning/Select control until "Utility" shows on the display.

3.Press and release the Tuning/Select control to enter the Utility menu and rotate until "Nap" appears on the display. Press and release the Tuning/Select control to enter Nap timer setup.

4.Rotate the Tuning/Select control until the required Nap time setting is selected. Press Tuning/Select control to confi rm the setting. The Nap timer can be set to between 5 and 120 minutes (in 5 minute increments) or to Off.

5.The Nap Timer indicator will show on the display when in stand-by mode. When the selected Nap timer has elapsed, the buzzer will sound.

6.To cancel the buzzer press the On/Off button.To disable the Nap timer go back into the Nap timer settings (steps 1 to 4 above) and select the Off option in step 4.

If you need any further advice, please call our Technical Helpline on :-

1

2

2-6

020 8758 0338 (Mon-Fri)

28