Roberts Radio ecologic 7 manual To return to auto clock set mode

To return to auto clock set mode

1.Press the On/Off button to switch on the radio. If necessary press and release the DAB/FM/AUX button to put the radio into DAB mode.

2.Press the Menu button once or twice as needed until "Main Menu" appears on the display. Rotate the Tuning/Select control until "Set up" shows on the display.

3.Press and release the Tuning/Select control to enter the Set up menu and rotate until "Clock" appears on the display. Press and release the Tuning/Select control to enter clock setup.

4.Rotate the Tuning/Select control until "Auto clock" appears on the display.

5.Press and release the Tuning/Select control.

6.The radio will immediately set its time according to the information received with the DAB broadcast. The radio will return to normal radio operation.

Note: If you select "Auto clock" and no DAB signal is found, you should either position the radio or its aerial so that a signal can be received, or revert to manual clock mode (see page 20).

If you need any further advice, please call our Technical Helpline on :-

1

1

2

2-5

020 8758 0338 (Mon-Fri)

22