Tuning radio stations manually (1)
1. Tune in to the desired station by turning the Fine tuning dial. The display will show the frequency in 100 or 200 kHz increments (FM), in 9 or 10 kHz increments (MW), in 3 kHz increments (LW) or in 5 kHz increments (SW).
2. To fine tune to the station, briefly push in and turn the Fine tuning | 1 |
dial. The display will show frequency changes in 50 kHz increments |
(FM) or 1 kHz increments (MW, LW and SW).
Note: The word STEP is displayed whilst in fine tune mode.
3. To return to the original mode, push the Fine tuning dial again.
Note: The word STEP is removed from the display.
Tuning radio stations manually (2)
1. Press the arrow buttons until you reach the desired station |
|
or | 1 |
Hold down one of the arrow buttons until the frequency changes | |
to a rapid |
|
The automatic search stops at the next station with a strong signal.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338
11