Automatic station search
This function allows an automatic search and store of nine stations in each of the FM, MW and LW bands (not SW). The search starts at the lowest frequency in the selected wave band, and stores the nine stations with the strongest signals. After the search has finished, a signal sounds.
1.To start the search, press both Arrow buttons at the same time and hold them down until a signal is heard. The display indicates the stored number.
Note: When you start the search, all the previously stored stations are deleted. During the search, the display shows the progress, but not the stations found.
2.The search can be stopped by pressing the On/Off button.
You can reorganise the preset stations using 'MODE 50 or 51' (see page 23).
1
2
Deleting preset stations
1. Enter the preset station using the numerical buttons '1 to 0'. The | 1 |
|
frequency and the preset number will be displayed. | 2 | |
|
2.Press the Memo AM/PM button. The selected preset station flashes.
3. Press the C Memo Del button to delete the station.
3
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338
13
