Roberts Radio R9969 manual Setting various function modes, Code, Function

Setting various function modes

Using the Mode button and a two-digit code, which you enter using the numerical buttons '1---0',you can change various functions:

	Code		Function	Code	Function
MODE	10		FM frequency change	11	FM frequency change in
*			in 100 kHz steps		200 kHz steps
MODE	20		MW frequency change	21	MW frequency change in
*			in 9 kHz steps		10 kHz steps
MODE	30		Time display in 12 hour	31	Time display in 24 hour
*			format		format
MODE	40		Signal tone off	41	Signal tone on
*
MODE	50		Arrange stations in	51	Arrange stations in
*			sequence from low to		sequence from low to
			high frequency range		high frequency range
To change the various function modes.
1. Press the		Mode button.			1	2

2.Enter the desired code, shown in the table using the numbered buttons '1---0'.

3. Press the Freq./Clock button to confirm. 3

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

23