Fluke 2620A, 2625A Measurement Connections, Setting Date and Time of Day, To avoid electric shock

Operating the Instrument from the Front Panel	3
Measurement Connections

Setting Date and Time of Day

The instrument features a built-in, battery-maintained clock and calendar. Verify or change the settings using the steps shown in Table 3-13. If necessary, refer to "Entering and Changing Numeric Values" for a more detailed description of the number changing technique used here.

				3-13. Date/Time Selection
			Year			Month.Day			Hour.Minut
			“YEAR”			“Mn.dY”			e” Hr.nn”
PRESS		CLOCK G				G			G
THESE	(KI D					D			D
BUTTONS:	])			E			E			E
			H			H			H
			J			J			J
TO SELECT	00-99				01-12.01-31			00-23.00-59
FROM
THESE
CHOICES:

Note: The last Epress completes clock and calendar setting and returns the instrument to Inactive Mode.

Pressing Cduring this sequence also returns the instrument to Inactive Mode; all entries to this point are discarded, and the clock/calendar settings are left unchanged.

Measurement Connections

Warning

To avoid electric shock:

∙When the input module is installed, consider all channels with connections as accessible terminals that may be hazardous live.

∙Disconnect the input module before touching or changing external wiring.

∙Remove inputs from live voltages before opening the input module.

3-17