Operating your radio - FM
1.Carefully extend the telescopic aerial
2.Press the On/Off button to switch on your radio. The radio will tune to the last selected radio station.
3.Press the FM/DAB button to select the FM band.
4.Press and release the Up button then press the Auto Tune button. Your radio will search in an upwards direction (low frequency to high frequency) and stop automatically when it finds a station of sufficient strength.
5.If RDS information is being received, then after a few seconds the display will update and show the radio station name.
6.To find other stations press the Auto Tune button as before.
7.If you press and release the Down button then press the Auto Tune button, your radio will search in a downwards direction (high frequency to low frequency) and stop automatically when it finds a station of sufficient strength.
8.When the end of the waveband is reached your radio will recommence tuning from the opposite end of the waveband.
9.Adjust the Volume and Tone controls to the required settings.
10.To switch off your radio press the On/Off button.
23
4
7
4,6,7
9
9
9
10
If you need any further advice, please call our Technical Helpline on :- | 14 | |
020 8758 0338 | ||
|
