OPERATING INSTRUCTIONS FOR Robic
Thank you for buying the Robic
(A) FEATURES
The
CHIME ICON | ALARM ICON |
S4S1
S3S2
S5
-Direct Mode Selection.
-6 modes of operation: Normal Time (T1), Dual Time (T2), Timer, Alarm, Chronograph and Chronograph Recall.
-Normal Time mode presents weekday, hours, minutes, seconds, month, day and “T1” (year can also be set).
-Dual Time mode presents weekday, hours, minutes, seconds, month, day and “T2” (year can also be set).
-2 display formats of time selectable, one with enlarged hour and minute digits.
-
-
-Auto calendar from
-2 Count Down Timers selectable. One timer works in loop structure and the other one is a count down stop timer. The timers are of
-6 alarms that can be set to refer to T1 or T2. 2 are daily alarms, 2 are weekday alarms and 2 are date alarms.
-Hourly chime signal, chime “on” with button confirmation sound.
-
-Both “Lap” and “Split” time can be taken.
-300 lap memories that can be stored in a maximum for recall.
-Each segment stores the segment number, month, day, weekday and lap data for recall.
-3 seconds light up EL back light.
(B) EL BACK LIGHT
Press S4 for EL back light with 3 seconds auto light up.
(C) BASIC OPERATION OF BUTTONS
S4S1
S3S2
S5
S1: - ENTER ALARM MODE (MODE SELECTION DISPLAY)
-TOGGLE DISPLAY FORMATS OF TIME
-START TIMER
-TOGGLE DISPLAY FORMATS OF TIMER (TIMER COUNTING)
-TOGGLE ALARM AND CHIME ON OR OFF
-START/LAP OF CHRONOGRAPH
-FORWARD SELECTION OF LAP NUMBER IN SEGMENT
-FORWARD SETTING (SET)
S2: - ENTER CHRONOGRAPH MODE (MODE SELECTION DISPLAY)
-VIEW NORMAL TIME OR DUAL TIME
-TOGGLE NORMAL TIME OR DUAL TIME (PRESS AND HOLD)
-SELECT TIMER (TIMER RESET OR RELOADED)
-STOP TIMER
1