(2) Alarm 3 and alarm 4
-Alarm 3 and alarm 4 are weekday alarms.
-As illustrated in the diagram, alarm 3 will sound at 7:30 AM of dual time (T2) from Monday to Friday.
-The setting sequence is shown as follow:
HOUR | S3 | S3 |
|
|
| |
MINUTE | STARTING WEEKDAY | |||||
| S3 | S3 | ENDING WEEKDAY | S3 |
|
|
|
| |||||
| T1/T2 |
|
|
| ||
|
|
|
|
|
(3) Alarm 5 and alarm 6
-Alarm 5 and alarm 6 are date alarms.
-As illustrated in the diagram, alarm 5 will sound at 8:30 PM of normal time (T1) on the 25th of December.
-The setting sequence is shown as follow:
S3S3
HOUR | MINUTE | MONTH |
S3 | S3 | ||
|
| T1/T2 | DAY |
|
|
S3
-After all adjustments are completed, press S4 to exit the setting mode.
-Press S1 to toggle the alarm and chime function on or off.
CHIME ICON
CHIME “ON”
Remarks:
1.There are 6 alarms that work independently. Alarm 1 and alarm 2 are daily alarms, alarm 3 and alarm 4 are weekday alarms, alarm 5 and alarm 6 are date alarms. If month and day of alarm 5 or alarm 6 are set to
2.The alarm sounds for 20 seconds at alarm time if the alarm function is “on”. Press any button to stop the alarm sound.
3.If the chime function is “on”, the chime icon will be displayed, the watch will give out a “Beep, Beep” sound at every full hour and there will be button confirmation sound.
4.The alarm function is automatically set to “on” when exiting setting mode.
5.The alarm icon is displayed at the time mode (T1 or T2) that the alarm is set to refer to.
6.If
7.If there is no button operation for about 2 minutes in setting mode, the watch will return back to Alarm mode automatically.
8.If S5 is pressed in Alarm mode, Time mode will be shown for 3 seconds and then return to the previous display automatically.
9.To exit Alarm mode, press S3 will enter mode selection display.
(H) HOW TO USE CHRONOGRAPH
S4S1
S3S2
S5
-At mode selection display, press S2 to enter Chronograph mode, mode prompt “CHRON” will be displayed for 2 seconds first.
5